How & why seal travertine tiles & pavers
If you spend much time exploring Travertine to find the perfect pattern for your kitchen or bath project, you will most certainly care about this next step: sealing your Travertine tile to ensure that it looks as beautiful as it did when you first saw it!
Why Seal Travertine Tiles & Pavers?
From 13 Facts About Travertine Tile, you’ll remember that Travertine is a natural and porous stone. As such, it needs to be sealed to protect its natural beauty (not to mention your investment) so it doesn’t absorb liquids – think red wine – and become permanently stained. Sealing means that you don’t lose what originally attracted you to the stone. A sealer acts like a barrier between the stone and potential stains.
When Should a Sealer Be Applied to Travertine Tiles & Pavers?
Sealing Travertine is very easy and should be done during installation and periodically thereafter – approximately every three to five years, depending on usage and traffic, as well as the products used to clean your surfaces after use. Harsh chemicals, for example, can prematurely wear away the sealer.
What is the Difference Between Enhancing & Natural Sealers?
You have several sealer options available to choose from [we’ll review those in a separate article] available from a home center or tile and stone supply center. The most common are Enhancing and Natural sealers.
– Enhancing sealers darken stone and give it a ‘wet’ look.
Natural sealers offer the same protection without changing the stone’s appearance.
How Do You Apply a Sealer to Travertine?
A sealer can be applied to Travertine using a sponge, brush, paint pad, cotton towel or sprayer.
– Any sealer that has not been absorbed by the stone in 5 minutes should be removed using an absorbent paper or micro-fiber towel.
– Allow at least thirty minutes of drying time between applications if two or more coats are applied. After the final coat, wait two to three hours.
-Test the sealer by putting water droplets on the stone; if you notice no water being absorbed, the Travertine has been successfully sealed!
– Although a sealed floor can be walked on two hours after applying the sealer, you should typically plan on twenty four hours to completely cure the surface. Definitely keep it dry for at least twelve hours.
Don’t Seal Stained Stone!
Before you seal, make sure your original surface has no stains! If you seal a stained stone, the stain remains forever. Similarly, your sub floor or installation surface needs to be clean and free of debris prior to installation. If items such as screws, nails, washers, even loose coins get stuck in the thin-set, they may rust and stain the stone from the back.
Although we recommend that Travertine be sealed given how porous it is, it makes sense to seal any natural stone surface – particularly Marble, Limestone, Onyx, Quartz and Granite in addition to Travertine. Yes, even Granite is porous, although considerably less so than Travertine. Without being sealed, it will start to look dirty after use.
For all natural stone surfaces, you will want to quickly clean up any liquid spills and especially those from red wine, cordial, soda or paint…
Which type of sealer do you prefer for your Travertine? We’d love to hear!